A MODULAR APPROACH

How TrailNexus works

We're developing a connected system that brings accessory power, switching, and monitoring together. Each module has a job, and the system is designed to grow with your build.

Core controller

The central coordinator of the system, designed to help connected modules work together.

Power distribution

A modular approach to providing and managing power for aftermarket accessories, without adding a separate control setup for every new device.

Switch interfaces

Connect the controls you use to the accessories you want to operate, with flexibility for different vehicle layouts.

Vehicle & Environmental Sensors

Sensor modules designed to bring vehicle and environmental monitoring into one connected system, with potential applications from electrical measurements to temperature and light.

From a switch to your accessories

Vehicle cutaway: dashboard switches connect to the core controller and power distribution under the hood. The battery powers the module, which powers bumper-mounted auxiliary lights.
View full-size illustration (opens in a new tab)
Read the diagram description
  1. Switch interface: In-cabin switches request accessory actions.
  2. Core controller: Processes requests and directs connected modules.
  3. Power distribution: Receives battery power and supplies the accessory.
  4. Accessory: Auxiliary lights at the front bumper are shown as one example.

Green lines show control connections from the switches to the core controller and then to power distribution. Orange lines show power from the battery to power distribution and then to the accessory.

Example applications include lighting, radios, air compressors, overland fridges, and water pumps. Compatibility depends on accessory requirements and system specifications. This is a system concept, not an installation wiring diagram.

Let your sensors do the switching

Two vehicle states: low beams activate auxiliary lights under the bumper; high beams activate the light bar above the windshield. A voltage sensor reports headlight state through the core controller to power distribution.
View full-size sensor illustration (opens in a new tab)
Read the sensor diagram description

With suitable sensors and configuration, the system could turn on one set of auxiliary lights when it senses the low beams are on, then switch to a different set when you select high beams.

A voltage sensor detects the factory headlight state and sends it to the core controller, which directs the power distribution module. Green lines show sensing and control. The battery supplies the power module, and separate outputs supply the auxiliary lights; orange lines show active accessory power and dashed gray lines show inactive outputs.

  • Low beams: Auxiliary set A, mounted under the front bumper, is on and projects forward. Set B, the light bar above the windshield, is off.
  • High beams: Set A is off. Set B is on and projects forward.

This is one configurable example. Behavior depends on sensors, configuration, and compatible hardware. It is not an installation wiring diagram. Use auxiliary lighting only where permitted.

Illustrative examples of the system concept. Specific compatibility, configuration options, and capabilities will be confirmed as development progresses. Use auxiliary lighting only where permitted.

Built to keep growing

We’re continuing to develop new ways to expand TrailNexus. Follow along for updates, and let us know if there’s a feature or application you’d like to see.

TrailNexus is preparing for launch. These descriptions explain our system concept, not finalized product specifications or availability.